Aluminium Kitchen Cabinet Singapore Price Guide (2026)

If you are renovating your HDB, condo, or landed property, you have likely come across aluminium kitchen cabinets as an alternative to traditional wood carpentry. But the biggest question homeowners have is: what is the aluminium kitchen cabinet Singapore price, and is it worth the investment?

In this guide, we break down the costs, compare aluminium with traditional wood carpentry, and explain why upgrading your kitchen's wet zones might be the smartest renovation decision you make.

Aluminium Kitchen Cabinet Singapore Price: What Homeowners Should Know

At WSS, aluminium kitchen cabinet pricing generally starts from S$290 per foot run before countertop and layout-specific add-ons. That figure is most useful as an early planning number; the final quote depends on the measured cabinet length, whether you need top and bottom cabinets, the door finish, internal shelving, handles, hinges, and any site constraints.

For HDB homeowners, the most important price question is not only "what is cheapest per foot?" but "what happens when the sink cabinet gets wet?" Aluminium costs more than basic MDF or plywood at the start, but it is designed for wet Singapore kitchens where humidity, pipe leaks, and cleaning water can damage wood-based carpentry.

How Much Do Aluminium Kitchen Cabinets Cost?

In Singapore, the cost of kitchen cabinetry is usually quoted "per foot run" (pfr). For Aluminium Kitchen Cabinets, the price is generally $290 per foot run. While this may seem higher than base carpentry, it is often comparable to the prices charged by certain Interior Design (ID) companies for standard wooden cabinets once their markups are included.

To put this into perspective for a standard HDB kitchen (assuming both top and bottom cabinets):

• Small Kitchen (10ft top & bottom - 20ft total): ~$5,800
• Medium Kitchen (15ft top & bottom - 30ft total): ~$8,700
• Large Kitchen (20ft+ top & bottom - 40ft+ total): $11,600+

Note: Prices vary based on the specific finishes (like PVDF woodgrain), internal shelving configurations, and the choice of countertop (quartz, sintered stone, or kompacplus).

Aluminium vs. Traditional Carpentry: A Cost Comparison

Let's look at how aluminium stacks up against the standard materials used by interior designers in Singapore.

1. MDF / Chipboard (Basic Carpentry)

• Cost: ~$100 - $130 pfr
• Pros: Very cheap upfront cost.
• Cons: Highly susceptible to water damage and swelling. If your sink pipe leaks even slightly, the base cabinet will swell and rot within weeks.

2. Plywood with Laminate (Standard Carpentry)

• Cost: ~$120 - $160 pfr
• Pros: The industry standard. Better water resistance than MDF.
• Cons: Still contains wood. Over time, constant exposure to Singapore's humidity and wet cooking can cause delamination and attract termites.

3. Aluminium Carpentry

• Cost: ~$290 pfr
• Pros: 100% waterproof, zero formaldehyde (no toxic smells), and completely termite-proof.
• Cons: Higher baseline cost, though factory-direct aluminium is frequently comparable in price to standard wood carpentry marked up by ID firms.

The Hidden Cost of Wood Cabinets

While wood carpentry might save you a few hundred dollars on your initial renovation bill, it carries a significant hidden risk.

In a kitchen, the area under the sink (the sink cabinet) is notorious for leaks and condensation. When a wooden base cabinet rots, you cannot simply replace the wood. You often have to tear out the expensive quartz or granite countertop resting on it, replace the cabinet, and install a new countertop. This single repair can easily cost $2,000 to $4,000.

Because aluminium is 100% waterproof, an Aluminium Kitchen Cabinet completely eliminates this risk. Water leaks will never cause the cabinet to warp, swell, or smell.

Why Choose WSS Aluminium Cabinets?

At WSS, we manufacture our aluminium cabinets locally in our Senoko factory.

1. The Look of Carpentry: We use premium fluorocarbon (PVDF) woodgrain finishes. Your cabinets will look exactly like warm, high-end wood, without the industrial coldness of old-school aluminium.
2. Aerospace-Grade Core: Our panels use an aluminium honeycomb core, making them incredibly strong but lightweight, preventing the doors from sagging over time.
3. No Middleman Fees: Because we are a direct manufacturer, you get factory-direct pricing without the heavy markups charged by third-party showrooms.

For extra confidence, you can also review WSS's BCA and HDB credentials, customer reviews, and commercial project history. The same Singapore factory team that makes WSS windows, doors, grilles, and shower screens also handles measurement, fabrication, installation, and after-sales service.

Frequently Asked Questions

Are aluminium cabinets termite-proof and zero formaldehyde? Yes. Unlike traditional carpentry which often uses glues and pressed wood, our aluminium honeycomb panels require no chemical binders or wood fibers. This makes them 100% immune to termites and entirely formaldehyde-free, creating a safer indoor air environment for your family.

Is the honeycomb core strong enough for heavy pots? Absolutely. The aerospace-inspired hexagonal aluminium honeycomb core provides extraordinary structural rigidity. It offers high load-bearing capacity and prevents the sagging commonly seen in older wooden shelves, easily supporting heavy cast iron pots and appliances.

Ready for a Free Quote?

If you are planning your kitchen renovation and want a precise estimate for your floor plan, we are here to help.

Get a free Aluminium Kitchen Cabinet quote via WhatsApp or check out our full product catalogue.